Editing PF Sense Firewall Implementation at GIPL (section)

== GUI Configuration Setup ==
Once The Setup is launched, Fill the details are follows:-


[[Image:Gpil-008.jpg]]

We have defined FQDN as gipl.firewall

DNS servers:- 8.8.8.8 and 4.4.2.2 Global DNS


Click NEXT

[[Image:Gpil-009.jpg]]


Select The Time-Zone as Asia/Kolkata .


And Click NEXT


[[Image:Gpil-010.jpg]]


Here we have Set WAN as Static Interface

With IP address :- 203.77.200.91/25

Gateway :- 203.77.200.1


Click Next.


[[Image:Gpil-011.jpg]]

Here we have Configured LAN interface with IP address 192.168.45.101/24

Click Next.

( note:-As per the client Network Topology , Lan interface have multiple Subnets configured , so we will be configuring Virtual IP’s from GUI )

After Setting Admin Password, Page will be redirected to Pfsense-Dashboard.





We Have Changed Default Port from 443 to 8080 Via :-
[[Image:Gpil-012.jpg]]

'''System > Advanced'''



[[Image:Gpil-013.jpg]]


Change TCP Port from Default 443 to 8080 .

Save .

Now pfsense Can be accessed via [https://IP:8080 https://IP:8080]

IP Address of Firewall is 203.77.200.91 on WAN interface.

Go to :- interface > assign , and edit Opt1 as DMZ , do not assign IP address to This interface , because we will be creating bridge interface .