Editing Muthoot Cluster (section)

==Configuration:==

 133# vim /etc/hosts
 192.168.1.133	liveserver.muthootco.com	liveserver
 192.168.1.132	liveserver1.muthootco.com	liveserver1
 10.0.0.1	node1.muthootco.com		node1
 10.0.0.2	node2.muthootco.com		node2
 192.168.1.127	node2-imm.muthootco.com		node2-imm
 192.168.1.126	node1-imm.muthootco.com		node1-imm

 Give  10.0.0.1 ip in eth1 in liveserver And 10.0.0.2 ip in eth1 in secondary server.

 Note : Give Ip to Management port Steps are follow:
 
 Step1: On boot Time go to bios
 Step2: System Settings-->Integrated Management Module -->  Network-->Give Ip
 
 133#  yum install cman rgmanager ricci luci

 Note: luci package is only on one system 
 
 Then open web interface :
 https://192.168.1.133:8084
 User: Same as system root details
 Then Go to Service Group Tab 
 Then Press add button 
 Service Name : Cluster-Service
 Failover Domain: None
 Recovery Policy : relocate
 IP Address: 192.168.1.140                \\ don’t give netmask for this IP
 
 133# yum remove libvirt           \\ Due to this package node can’t be add it’s give error