Editing PF Sense Firewall Implementation at GIPL (section)

== Configuration Of Bridge Interface ==
Now we have to configure '''Interface Bridges''' in order to Setup Pfsense in 

Transparent mode.

Reference:- <u>https://doc.pfsense.org/index.php/Interface_Bridges</u>

Navigate To :- Interfaces > (assign) 

on the Bridges tab Click “ +” symbol to add a new bridge .
[[Image:Gpil-014.jpg]] 

Ctrl-Click to select the Member interfaces from the list of available interfaces and type a Description , we have selected WAN + DMZ as bridge0 and create new Interface BRIDGEINTERFACE using bridge0 .

[[Image:Gpil-015.jpg]]


By default, traffic is filtered on the member interfaces and not on the bridge interface itself. This behavior may be changed by toggling the values of '''net.link.bridge.pfil_member''' and net.link.bridge.pfil'''_bridge '''under System''' > Advanced '''on the '''System Tunables''' tab. With them set at ''0'' and ''1'', respectively, then filtering would be performed on the bridge only.


[[Image:Gpil-016.jpg]]


'''Now Pfsense is Configured In Bridge Mode with '''

'''WAN interface: - 203.77.200.91/25 gateway :- 203.77.200.1'''

'''LAN interface:- 192.168.45.101/24'''

'''DMZ: - no ip '''

'''BRIDGEINTERFACE:- 203.77.200.92/25'''

[[Image:Gpil-017.jpg]]