Editing Cluster and its component Understanding (section)

==== ⁠1.10.4.2. REAL SERVER Subsection ====
Clicking on the '''REAL SERVER''' subsection link at the top of the panel displays the '''EDIT REAL SERVER''' subsection. It displays the status of the physical server hosts for a particular virtual service. 

⁠

[[Image:real-server-sub.png]]

'''Figure&nbsp;1.32.&nbsp;The REAL SERVER Subsection'''

Click the '''ADD''' button to add a new server. To delete an existing server, select the radio button beside it and click the '''DELETE''' button. Click the '''EDIT''' button to load the '''EDIT REAL SERVER''' panel, as seen in [https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/5/html-single/Cluster_Suite_Overview/index.html#gr-real-server-config-CSO Figure 1.33, “The REAL SERVER Configuration Panel”]. 

⁠

[[Image:real-server-sub-2.png]]

'''Figure&nbsp;1.33.&nbsp;The REAL SERVER Configuration Panel'''

This panel consists of three entry fields: 

'''Name'''

A descriptive name for the real server. 

'''Note'''

This name is ''not'' the hostname for the machine, so make it descriptive and easily identifiable. 

'''Address'''

The real server's IP address. Since the listening port is already specified for the associated virtual server, do not add a port number. 

'''Weight'''

An integer value indicating this host's capacity relative to that of other hosts in the pool. The value can be arbitrary, but treat it as a ratio in relation to other real servers.