Jump to content

GSTN - Cups documentation: Difference between revisions

From TetraWiki
← Older editNewer edit →
Praveen (talk | contribs)
474 edits
No edit summary
Praveen (talk | contribs)
474 edits
No edit summary
Line 3: Line 3:




<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>
<div style="color:#00000a;"></div>


Samba AD
CUPS (Common Unix Printing System)


As is Build for Domain Controller installation
Installation and configuration for CUPS


Date : 08.08.2016
Date : 25.08.2016


Document Version : 1.0
Document Version : 1.0








Table of Contents[[#RefHeading2063957709649|1.Setup a Samba Active Directory Domain Controller4]]


:[[#RefHeading2065957709649|1.1.Configure yum repository for Packages installation.4]]


:[[#RefHeading2067957709649|1.2.Assign the Ipv4 address and restart the network services.5]]
Table of Contents:[[#RefHeading3061179521510|Configure CUPS Printing3]]


:[[#RefHeading2069957709649|1.3.Assign the Ipv6 address and restart the network services. And set hostname.6]]
:[[#RefHeading3091179521510|CUPS Web interface (Adding printers).6]]


:[[#RefHeading2071957709649|1.4.Edit /etc/hosts file and make below entries.7]]
:[[#RefHeading96093905196|Testing printer (Print test page).9]]


:[[#RefHeading2073957709649|1.5.Restart network service.8]]
:[[#RefHeading96293905196|CUPS Integration with Samba.11]]


:[[#RefHeading2075957709649|1.6.Reboot server.9]]
== Configure CUPS Printing ==


:[[#RefHeading2077957709649|1.7.Install Dependencies for samba installation.9]]
1. Login to server, using root user and install CUPS.


:[[#RefHeading2079957709649|1.8.Dependencies Installation is completed.10]]
''<nowiki># yum install cups*</nowiki>''


[[#RefHeading2081957709649|2.Samba Installation11]]


:[[#RefHeading2083957709649|2.1.Download samba file from https://www.samba.org/ and extract it.11]]
[[Image:]]


:[[#RefHeading2085957709649|2.2.Enter in samba-4.4.4 directory and run configure command.11]]


:[[#RefHeading2087957709649|2.3.Run make command.13]]
2. Edit cupsd.conf file.


:[[#RefHeading2089957709649|2.4.Run make install command.14]]
''<nowiki># vi /etc/cups/cupsd.conf</nowiki>''


:[[#RefHeading2091957709649|2.5.Provision a new domain:14]]


:[[#RefHeading2093957709649|2.6.Provisioning completed successfully.15]]


[[#RefHeading2095957709649|3.Initialisation16]]


:[[#RefHeading2097957709649|3.1.Samba doesn't yet have init scripts included16]]
[[Image:]]


:[[#RefHeading2099957709649|3.2.Set the permissions on samba4 file.19]]


:[[#RefHeading2101957709649|3.3.Restart samba19]]


:[[#RefHeading2103957709649|3.4.Run "smbclient"20]]


:[[#RefHeading2105957709649|3.5.Open /etc/named.conf file.21]]


:[[#RefHeading2107957709649|3.6.DNS keytab22]]


:[[#RefHeading2109957709649|3.7.Also make below entry in named.conf22]]
3. Make below entries and save file.


:[[#RefHeading2111957709649|3.8.Change the owner ship as below and restart named services.23]]


:[[#RefHeading2113957709649|3.9.Copy Kerberos23]]<div style="color:#00000a;"></div>
''MaxLogSize 1m''


= {{anchor|RefHeading2063957709649}} Setup a Samba Active Directory Domain Controller =
''LogLevel debug''


== {{anchor|RefHeading2065957709649}} Configure yum repository for Packages installation. ==
''<nowiki># Allow remote access</nowiki>''


<div style="color:#00000a;">Edit /etc/yum.repos.d/local.repo </div>
''Listen localhost:631''


<div style="color:#00000a;"><nowiki># vi /etc/yum.repos.d/local.repo </nowiki></div>
''Listen 172.18.101.14:631''


''Listen 2404:a800:1000:d:7800::e:631''


[[Image:parveen]]
''Listen /var/run/cups/cups.sock''


<div style="color:#00000a;">Make below entries. Save file and exit.</div>
''Browsing On''


<div style="color:#00000a;">[local]</div>
''BrowseLocalProtocols dnssd''


''DefaultAuthType Basic''


<div style="color:#00000a;">name=local</div>
''WebInterface Yes''


''<Location />''


<div style="color:#00000a;">baseurl=file:///mnt</div>
<div style="color:#00000a;">''<nowiki># Allow remote administration...</nowiki>''</div>


<div style="color:#00000a;">''Order allow,deny''</div>


<div style="color:#00000a;">gpgcheck=0</div>
<div style="color:#00000a;">''Allow localhost''</div>


<div style="color:#00000a;">''Allow 172.18.5.0/24''</div>


<div style="color:#00000a;">enabled=1</div>
''</Location>''


''<Location /admin>''


<div style="color:#00000a;">''<nowiki># Allow remote administration...</nowiki>''</div>


<div style="color:#00000a;">''Order allow,deny''</div>


[[Image:]]
<div style="color:#00000a;">''Allow localhost''</div>


<div style="color:#00000a;">''Allow 172.18.5.0/24''</div>


== {{anchor|RefHeading2067957709649}} Assign the Ipv4 address and restart the network services. ==
''</Location>''


<div style="color:#00000a;"><nowiki># nmcli connection modify eth0 ipv4.addresses 172.18.101.14/24 ipv4.method manual ipv4.gateway 172.18.101.1 connection.autoconnect yes ipv4.dns 172.18.101.14</nowiki></div>
''<Location /admin/conf>''


<div style="color:#00000a;"><nowiki># systemctl restart network.service</nowiki></div>
<div style="color:#00000a;">''AuthType Default''</div>


<div style="color:#00000a;">''Require user @SYSTEM''</div>


[[Image:]]
<div style="color:#00000a;">''<nowiki># Allow remote access to the configuration files...</nowiki>''</div>


<div style="color:#00000a;">''Order allow,deny''</div>


== {{anchor|RefHeading2069957709649}} Assign the Ipv6 address and restart the network services. And set hostname. ==
<div style="color:#00000a;">''Allow localhost''</div>


<div style="color:#00000a;"><nowiki># nmcli connection modify eth0 ipv6.addresses 2404:a800:1000:d:7800::e/69 ipv6.method manual ipv6.gateway 2404:a800:1000:d:7800::1 connection.autoconnect yes ipv6.dns 2404:a800:1000:d:7800::e</nowiki></div>
<div style="color:#00000a;">''Allow 172.18.5.0/24''</div>




<div style="color:#00000a;"><nowiki># hostnamectl set-hostname gd9103.gstn.local</nowiki></div>




[[Image:]]== {{anchor|RefHeading2071957709649}} Edit /etc/hosts file and make below entries. ==


<div style="color:#00000a;"><nowiki># vi /etc/hosts</nowiki></div>


<div style="color:#00000a;">172.18.101.14gd9103.gstn.localgd9103</div>




<div style="color:#00000a;"></div>


<div style="color:#00000a;">2404:a800:1000:d:7800::egd9103.gstn.localgd9103</div>








[[Image:]]




== {{anchor|RefHeading2073957709649}} Restart network service. ==


<div style="color:#00000a;"><nowiki># systemctl restart network.service</nowiki></div>




[[Image:]]




== {{anchor|RefHeading2075957709649}} Reboot server. ==


<div style="color:#00000a;"><nowiki># init 6</nowiki></div>




[[Image:]]== {{anchor|RefHeading2077957709649}} Install Dependencies for samba installation. ==






<div style="color:#00000a;"><nowiki># yum install perl gcc attr libacl-devel libblkid-devel gnutls-devel readline-devel python-devel gdb pkgconfig krb5-workstation zlib-devel setroubleshoot-server libaio-devel setroubleshoot-plugins policycoreutils-python libsemanage-python perl-ExtUtils-MakeMaker perl-Parse-Yapp perl-Test-Base popt-devel libxml2-devel libattr-devel keyutils-libs-devel cups-devel bind-utils libxslt docbook-style-xsl openldap-devel autoconf python-crypto pam-devel</nowiki></div>




[[Image:]]== {{anchor|RefHeading2079957709649}} Dependencies Installation is completed. ==






[[Image:]]


[[Image:]]


<div style="color:#00000a;"></div>= {{anchor|RefHeading2081957709649}} Samba Installation =
4. Restart cups service.


== {{anchor|RefHeading2083957709649}} Download samba file from [https://www.samba.org/ https://www.samba.org/] and extract it. ==
''<nowiki># systemctl restart cups.service </nowiki>''


<div style="color:#00000a;"><nowiki># tar xvzf samba-4.4.4.tar.gz</nowiki></div>


<div style="color:#00000a;">[[Image:]]</div>


[[Image:]]== {{anchor|RefHeading2085957709649}} Enter in samba-4.4.4 directory and run configure command. ==


<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


<div style="color:#00000a;"><nowiki># cd samba-4.4.4/</nowiki></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"><nowiki># ./configure</nowiki></div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


[[Image:]]
== CUPS Web interface (Adding printers). ==


<div style="color:#00000a;">1. Now open the web browser and open link <span style="color:#3333ff;">''https://172.18.101.14:631</span>.''</div>


<div style="color:#00000a;">Now configure done successfully.</div>
From here we can add and manage printers. to add a new printer click '''''“Administration”'''''.


[[Image:]]


[[Image:]]
<div style="color:#00000a;">2. Click and “'''''Add Printer”''''' and type root username and password of the cups server:</div>




== {{anchor|RefHeading2087957709649}} Run make command. ==
[[Image:]]


<div style="color:#00000a;"><nowiki># make</nowiki></div>


<div style="color:#00000a;"></div>


[[Image:]]
<div style="color:#00000a;">3. Select '''“''AppSocket/HP JetDirect''”''' (here i have Hp Laserjet Pro m202dw printers) and click '''''Continue''. '''</div>


<div style="color:#00000a;">Make command finished successfully.</div>


[[Image:]]


<div style="color:#00000a;">4. In connection tab type the '''''ipp://172.18.5.67:631/ipp''''' (172.18.5.67 is printer IP) and click ''Continue''.</div>




[[Image:]]== {{anchor|RefHeading2089957709649}} Run make install command. ==
[[Image:]]


<div style="color:#00000a;"><nowiki># make install</nowiki></div>




[[Image:]]== {{anchor|RefHeading2091957709649}} Provision a new domain: ==


<div style="color:#00000a;">5. Fill the required information and click on “'''''Share This Printer''''' “ and click on “'''''Continue'''''”.</div>


[[Image:]]


<div style="color:#00000a;"><nowiki># /usr/local/samba/bin/samba-tool domain provision --use-rfc2307 --interactive</nowiki></div>
<div style="color:#00000a;">6. Select the '''“''Generic''”''' print driver and click on '''''“continue”'''''.</div>


[[Image:]]


[[Image:]]== {{anchor|RefHeading2093957709649}} Provisioning completed successfully. ==






[[Image:]]




= {{anchor|RefHeading2095957709649}} Initialisation =


== {{anchor|RefHeading2097957709649}} Samba doesn't yet have init scripts included ==


# we can copy script from below link. [https://wiki.samba.org/index.php/Samba4/InitScript https://wiki.samba.org/index.php/Samba4/InitScript]
<div style="color:#00000a;">7. Select the model '''“''Generic PCL Laser Printer(en)''” '''and click on '''''“Add Printer”.'''''</div>
# create a file /etc/rc.d/init.d/samba4


Now printer configuration has been done.


[[Image:]]


<div style="color:#00000a;"></div>
== Testing printer (Print test page). ==


<div style="color:#00000a;"><nowiki># vi /etc/rc.d/init.d/samba4</nowiki></div>
<div style="color:#00000a;">1. Click on ''“'''Printers'''” ''tab''. ''Here we can see the installed printers click on printer which we want to test.</div>


[[Image:]]


<div style="color:#00000a;">and paste the below content in this file. </div>


<div style="color:#00000a;">________________________________</div>
<div style="color:#00000a;">2. Click on''''' “Maintenance” '''''and select “'''''Print Test Page'''''”.</div>


<div style="color:#00000a;"><nowiki>#! /bin/bash</nowiki></div>
[[Image:]]


<div style="color:#00000a;"><nowiki>#</nowiki></div>


<div style="color:#00000a;"><nowiki># samba4 Bring up/down samba4 service</nowiki></div>
<div style="color:#00000a;">3. Page will say that “''Test page sent:''”</div>


<div style="color:#00000a;"><nowiki>#</nowiki></div>


<div style="color:#00000a;"><nowiki># chkconfig: - 90 10</nowiki></div>
[[Image:]]


<div style="color:#00000a;"><nowiki># description: Activates/Deactivates all samba4 interfaces configured to \</nowiki></div>


<div style="color:#00000a;"><nowiki># start at boot time.</nowiki></div>


<div style="color:#00000a;"><nowiki>#</nowiki></div>


<div style="color:#00000a;"><nowiki>### BEGIN INIT INFO</nowiki></div>


<div style="color:#00000a;"><nowiki># Provides:</nowiki></div>


<div style="color:#00000a;"><nowiki># Should-Start:</nowiki></div>


<div style="color:#00000a;"><nowiki># Short-Description: Bring up/down samba4</nowiki></div>


<div style="color:#00000a;"><nowiki># Description: Bring up/down samba4</nowiki></div>


<div style="color:#00000a;"><nowiki>### END INIT INFO</nowiki></div>


<div style="color:#00000a;"><nowiki># Source function library.</nowiki></div>
== CUPS Integration with Samba. ==


<div style="color:#00000a;">. /etc/init.d/functions</div>
<div style="color:#00000a;">To integrate cups with samba we can follow below steps.</div>


<div style="color:#00000a;">if [ -f /etc/sysconfig/samba4 ]; then</div>
<div style="color:#00000a;">1. Open “'''''/usr/local/samba/etc/smb.conf'''''” file.</div>


<div style="color:#00000a;">. /etc/sysconfig/samba4</div>
''<nowiki># vi /usr/local/samba/etc/smb.conf</nowiki>''


<div style="color:#00000a;">fi</div>
[[Image:]]


<div style="color:#00000a;">CWD=$(pwd)</div>


<div style="color:#00000a;">prog="samba4"</div>


<div style="color:#00000a;">start() {</div>


<div style="color:#00000a;"><nowiki># Attach irda device</nowiki></div>


<div style="color:#00000a;">echo -n $"Starting $prog: "</div>


<div style="color:#00000a;">/usr/local/samba/sbin/samba</div>


<div style="color:#00000a;">sleep 2</div>


<div style="color:#00000a;">if ps ax | grep -v "grep" | grep -q /samba/sbin/samba ; then success $"samba4 startup"; else failure $"samba4 startup"; fi</div>


<div style="color:#00000a;">echo</div>


<div style="color:#00000a;">}</div>


<div style="color:#00000a;">stop() {</div>


<div style="color:#00000a;"><nowiki># Stop service.</nowiki></div>


<div style="color:#00000a;">echo -n $"Shutting down $prog: "</div>


<div style="color:#00000a;">killall samba</div>


<div style="color:#00000a;">sleep 2</div>


<div style="color:#00000a;">if ps ax | grep -v "grep" | grep -q /samba/sbin/samba ; then failure $"samba4 shutdown"; else success $"samba4 shutdown"; fi</div>
<div style="color:#00000a;">2. Make below entry in '''''smb.conf''''' file in Global section.</div>


<div style="color:#00000a;">echo</div>
<div style="color:#00000a;">''rpc_server:spoolss = external''</div>


<div style="color:#00000a;">}</div>
<div style="color:#00000a;">''rpc_daemon:spoolssd = fork''</div>


<div style="color:#00000a;">status() {</div>
<div style="color:#00000a;">''spoolss: architecture = Windows x64''</div>


<div style="color:#00000a;">/usr/local/samba/sbin/samba --show-build</div>


<div style="color:#00000a;">}</div>
[[Image:]]


<div style="color:#00000a;"><nowiki># See how we were called.</nowiki></div>


<div style="color:#00000a;">case "$1" in</div>


<div style="color:#00000a;">start)</div>


<div style="color:#00000a;">start</div>


<div style="color:#00000a;"><nowiki>;;</nowiki></div>


<div style="color:#00000a;">stop)</div>


<div style="color:#00000a;">stop</div>


<div style="color:#00000a;"><nowiki>;;</nowiki></div>


<div style="color:#00000a;">status)</div>


<div style="color:#00000a;">status irattach</div>


<div style="color:#00000a;"><nowiki>;;</nowiki></div>


<div style="color:#00000a;">restart|reload)</div>


<div style="color:#00000a;">stop</div>


<div style="color:#00000a;">start</div>
<div style="color:#00000a;"></div>


<div style="color:#00000a;"><nowiki>;;</nowiki></div>
<div style="color:#00000a;">3. Create the Samba spool directory and set permission. </div>


<div style="color:#00000a;"><nowiki>*)</nowiki></div>
''<nowiki># mkdir -p /var/spool/samba4/ ; chmod 1777 /var/spool/samba4/</nowiki>''


<div style="color:#00000a;">echo $"Usage: $0 {start|stop|restart|status}"</div>


<div style="color:#00000a;">exit 1</div>
[[Image:]]


<div style="color:#00000a;">esac</div>


<div style="color:#00000a;">exit 0</div>
<div style="color:#00000a;">4. Open again '''''/usr/local/samba/etc/smb.conf '''''file and make below entries.</div>


<div style="color:#00000a;">______________________________________________________________________________</div>


''[ProLaserJet]''


[[Image:]]
<div style="color:#00000a;">''comment = ProLaserJet''</div>


<div style="color:#00000a;">''path = /var/spool/samba4/''</div>


<div style="color:#00000a;">''browseable = yes''</div>


<div style="color:#00000a;">''printable = yes''</div>


<div style="color:#00000a;">''printer name = ProLaserJet''</div>




''[ProLaserJet2]''


<div style="color:#00000a;">''comment = ProLaserJet2''</div>


<div style="color:#00000a;">''path = /var/spool/samba4/''</div>


<div style="color:#00000a;">''browseable = yes''</div>


<div style="color:#00000a;">''printable = yes''</div>


<div style="color:#00000a;">''printer name = ProLaserJet2''</div>




[[Image:]]




<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


<div style="color:#00000a;"></div>


<div style="color:#00000a;">5. Restart samba service.</div>


<div style="color:#00000a;">''<nowiki># systemctl stop samba4.service</nowiki>'' </div>


[[Image:]]








<div style="color:#00000a;">''<nowiki># systemctl start samba4.service</nowiki>'' </div>




 
[[Image:]]
 
 
 
 
 
 
 
 
== {{anchor|RefHeading2099957709649}} Set the permissions on samba4 file. ==
 
<div style="color:#00000a;"><nowiki># chmod 755 /etc/rc.d/init.d/samba4</nowiki></div>
 
<div style="color:#00000a;"><nowiki># chmod +x /etc/rc.d/init.d/samba4</nowiki></div>
 
<div style="color:#00000a;"><nowiki># ln -s /etc/rc.d/init.d/samba4 /etc/rc3.d/S80samba4</nowiki></div>
 
<div style="color:#00000a;"><nowiki># chkconfig --add samba4</nowiki></div>
 
<div style="color:#00000a;"><nowiki># chkconfig samba4 on</nowiki></div>
 
 
[[Image:]]== {{anchor|RefHeading2101957709649}} Restart samba ==
 
<div style="color:#00000a;"><nowiki># service samba4 restart</nowiki></div>
 
<div style="color:#00000a;">or ''systemctl start samba4.service''</div>
 
 
[[Image:]]
 
 
== {{anchor|RefHeading2103957709649}} Run "smbclient" ==
 
<div style="color:#00000a;">This is done to check if Samba provides the AD DC default shares "netlogon" and "sysvol", that were created in "smb.conf" during provisioning.</div>
 
 
<div style="color:#00000a;"><nowiki># /usr/local/samba/bin/smbclient -L localhost -U%</nowiki></div>
 
 
[[Image:]]== {{anchor|RefHeading2105957709649}} Open /etc/named.conf file. ==
 
 
 
<div style="color:#00000a;"><nowiki># vi /etc/named.conf</nowiki></div>
 
 
[[Image:]]== {{anchor|RefHeading2107957709649}} DNS keytab ==
 
<div style="color:#00000a;">This file was automatically created during provisioning/updating. Add the following' tkey-gssapi-keytab' option to the 'options' section of your named.conf, and set other values as shown in screen shot.</div>
 
 
tkey-gssapi-keytab "/usr/local/samba/private/dns.keytab";
 
 
 
 
[[Image:]]== {{anchor|RefHeading2109957709649}} Also make below entry in named.conf ==
 
<div style="color:#00000a;"></div>
 
include "/usr/local/samba/private/named.conf";
 
 
[[Image:]]== {{anchor|RefHeading2111957709649}} Change the owner ship as below and restart named services. ==
 
<div style="color:#00000a;"><nowiki># chown named.named /var/named/</nowiki></div>
 
<div style="color:#00000a;"><nowiki># chgrp named /usr/local/samba/private/dns.keytab</nowiki></div>
 
<div style="color:#00000a;"><nowiki># chmod g+r /usr/local/samba/private/dns.keytab</nowiki></div>
 
<div style="color:#00000a;"><nowiki># systemctl enable named.service</nowiki></div>
 
<div style="color:#00000a;"><nowiki># systemctl restart named.service</nowiki></div>== {{anchor|RefHeading2113957709649}} Copy Kerberos ==
 
<div style="color:#00000a;">file /usr/local/samba/private/krb5.conf to /etc/krb5.conf</div>
 
<div style="color:#00000a;"><nowiki># cp /etc/krb5.conf /etc/krb5.conf.ori</nowiki></div>
 
 
<div style="color:#00000a;"><nowiki># cp /usr/local/samba/private/krb5.conf /etc/krb5.conf</nowiki></div>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
[[Image:]]
 
 
<div style="color:#00000a;"></div>

Revision as of 04:16, 1 February 2019



CUPS (Common Unix Printing System)

Installation and configuration for CUPS

Date : 25.08.2016

Document Version : 1.0




Table of Contents:Configure CUPS Printing3

:CUPS Web interface (Adding printers).6

:Testing printer (Print test page).9

:CUPS Integration with Samba.11

== Configure CUPS Printing ==

1. Login to server, using root user and install CUPS.

# yum install cups*


[[Image:]]


2. Edit cupsd.conf file.

# vi /etc/cups/cupsd.conf



[[Image:]]




3. Make below entries and save file.


MaxLogSize 1m

LogLevel debug

# Allow remote access

Listen localhost:631

Listen 172.18.101.14:631

Listen 2404:a800:1000:d:7800::e:631

Listen /var/run/cups/cups.sock

Browsing On

BrowseLocalProtocols dnssd

DefaultAuthType Basic

WebInterface Yes

<Location />

# Allow remote administration...
Order allow,deny
Allow localhost
Allow 172.18.5.0/24

</Location>

<Location /admin>

# Allow remote administration...
Order allow,deny
Allow localhost
Allow 172.18.5.0/24

</Location>

<Location /admin/conf>

AuthType Default
Require user @SYSTEM
# Allow remote access to the configuration files...
Order allow,deny
Allow localhost
Allow 172.18.5.0/24

















[[Image:]]

4. Restart cups service.

# systemctl restart cups.service


[[Image:]]


== CUPS Web interface (Adding printers). ==

1. Now open the web browser and open link https://172.18.101.14:631.

From here we can add and manage printers. to add a new printer click “Administration”.

[[Image:]]

2. Click and “Add Printer” and type root username and password of the cups server:


[[Image:]]


3. Select “AppSocket/HP JetDirect” (here i have Hp Laserjet Pro m202dw printers) and click Continue.


[[Image:]]

4. In connection tab type the ipp://172.18.5.67:631/ipp (172.18.5.67 is printer IP) and click Continue.


[[Image:]]



5. Fill the required information and click on “Share This Printer “ and click on “Continue”.

[[Image:]]

6. Select the “Generic” print driver and click on “continue”.

[[Image:]]





7. Select the model “Generic PCL Laser Printer(en)” and click on “Add Printer”.

Now printer configuration has been done.

[[Image:]]

== Testing printer (Print test page). ==

1. Click on “Printers” tab. Here we can see the installed printers click on printer which we want to test.

[[Image:]]


2. Click on “Maintenance” and select “Print Test Page”.

[[Image:]]


3. Page will say that “Test page sent:”


[[Image:]]






== CUPS Integration with Samba. ==

To integrate cups with samba we can follow below steps.
1. Open “/usr/local/samba/etc/smb.conf” file.

# vi /usr/local/samba/etc/smb.conf

[[Image:]]









2. Make below entry in smb.conf file in Global section.
rpc_server:spoolss = external
rpc_daemon:spoolssd = fork
spoolss: architecture = Windows x64


[[Image:]]








3. Create the Samba spool directory and set permission.

# mkdir -p /var/spool/samba4/ ; chmod 1777 /var/spool/samba4/


[[Image:]]


4. Open again /usr/local/samba/etc/smb.conf file and make below entries.


[ProLaserJet]

comment = ProLaserJet
path = /var/spool/samba4/
browseable = yes
printable = yes
printer name = ProLaserJet


[ProLaserJet2]

comment = ProLaserJet2
path = /var/spool/samba4/
browseable = yes
printable = yes
printer name = ProLaserJet2


[[Image:]]


5. Restart samba service.
# systemctl stop samba4.service

[[Image:]]



# systemctl start samba4.service


[[Image:]]

Retrieved from "https://wiki.tetrain.com/index.php?title=GSTN_-_Cups_documentation&oldid=2534"