ISON BPO Nagios XI

Building Probe Machine Documentation

STEP 1: Install Mod-gearman in the Probe Machine and Configure

rpm -Uvh https://repo.nagios.com/nagios/7/nagios-repo-7-4.el7.noarch.rpm

yum update

wget https://assets.nagios.com/downloads/nagiosxi/scripts/ModGearmanInstall.sh

chmod +x ModGearmanInstall.sh

./ModGearmanInstall.sh --type=worker

{ Set the Nagios XI Server IP address is 172.105.253.143 }

vi /etc/mod_gearman/worker.conf

{Add the hostgroups Location of probe machine}

systemctl restart mod-gearman-worker

{Now go to the Nagios XI server and add the hostgroups of the probe machine which you created now}

vi /etc/mod_gearman/module.conf

systemctl restart gearmand

gearman_top {to see all the hostgroups}

telnet 172.105.253.143 4730

(if telnet status is connected means communication is established between the probe machine and Nagios XI server)

Step 2: Install Nagios XI in the Probe Machine to get the Plugins

cd /tmp wget https://assets.nagios.com/downloads/nagiosxi/5/xi-5.8.7.tar.gz tar xzf xi-5.8.7.tar.gz cd nagiosxi/ ./fullinstall cd /usr/local/nagios/libexec/ ls (to see all the plugins)

Step 3: Install check_nwc_health Plugin in the Probe Machine

wget https://labs.consol.de/assets/downloads/nagios/check_nwc_health-10.0.0.2.tar.gz

tar xvfz check_nwc_health-10.0.0.2.tar.gz
  cd check_nwc_health-10.0.0.2
   ./configure
   make
   make install
   cd /usr/local/nagios/libexec/

Note: while running the check_nwc_health plugin some files will be missing you have to download those files ./check_nwc_health --hostname 14.98.74.34 --community public --mode hardware-health After running this command if error comes can’t locate and *.pm file download the file using yum install perl-file name Suppose error comes can’t locate JSON.pm file then I will run command like this yum install perl-JSON yum install perl-File-Slurp (if error comes can’t locate File/Slurp.pm file) yum install perl-Module-Load (if error comes can’t locate Module/Load.pm file)

./check_nwc_health --hostname 14.98.74.34 --community public --mode cpu-load yum install perl-JSON-XS (If error comes can’t locate JSON/XS.pm file)