CUPS (Common Unix Printing System)
Installation and configuration for CUPS
Date : 25.08.2016
Document Version : 1.0
Table of Contents:Configure CUPS Printing3
:CUPS Web interface (Adding printers).6
:Testing printer (Print test page).9
:CUPS Integration with Samba.11
== Configure CUPS Printing ==
1. Login to server, using root user and install CUPS.
# yum install cups*
File:GSTNCUPS
2. Edit cupsd.conf file.
# vi /etc/cups/cupsd.conf
File:GSTNCUPS
3. Make below entries and save file.
MaxLogSize 1m
LogLevel debug
# Allow remote access
Listen localhost:631
Listen 172.18.101.14:631
Listen 2404:a800:1000:d:7800::e:631
Listen /var/run/cups/cups.sock
Browsing On
BrowseLocalProtocols dnssd
DefaultAuthType Basic
WebInterface Yes
<Location />
# Allow remote administration...
Order allow,deny
Allow localhost
Allow 172.18.5.0/24
</Location>
<Location /admin>
# Allow remote administration...
Order allow,deny
Allow localhost
Allow 172.18.5.0/24
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
# Allow remote access to the configuration files...
Order allow,deny
Allow localhost
Allow 172.18.5.0/24
File:GSTNCUPS
4. Restart cups service.
# systemctl restart cups.service
== CUPS Web interface (Adding printers). ==
From here we can add and manage printers. to add a new printer click “Administration”.
File:GSTNCUPS
2. Click and “Add Printer” and type root username and password of the cups server:
File:GSTNCUPS
3. Select “AppSocket/HP JetDirect” (here i have Hp Laserjet Pro m202dw printers) and click Continue.
File:GSTNCUPS
4. In connection tab type the ipp://172.18.5.67:631/ipp (172.18.5.67 is printer IP) and click Continue.
File:GSTNCUPS
5. Fill the required information and click on “Share This Printer “ and click on “Continue”.
File:GSTNCUPS
6. Select the “Generic” print driver and click on “continue”.
File:GSTNCUPS
7. Select the model “Generic PCL Laser Printer(en)” and click on “Add Printer”.
Now printer configuration has been done.
File:GSTNCUPS
== Testing printer (Print test page). ==
1. Click on “Printers” tab. Here we can see the installed printers click on printer which we want to test.
File:GSTNCUPS
2. Click on “Maintenance” and select “Print Test Page”.
File:GSTNCUPS
3. Page will say that “Test page sent:”
File:GSTNCUPS
== CUPS Integration with Samba. ==
To integrate cups with samba we can follow below steps.
1. Open “/usr/local/samba/etc/smb.conf” file.
# vi /usr/local/samba/etc/smb.conf
File:GSTNCUPS
2. Make below entry in smb.conf file in Global section.
rpc_server:spoolss = external
rpc_daemon:spoolssd = fork
spoolss: architecture = Windows x64
File:GSTNCUPS
3. Create the Samba spool directory and set permission.
# mkdir -p /var/spool/samba4/ ; chmod 1777 /var/spool/samba4/
File:GSTNCUPS
4. Open again /usr/local/samba/etc/smb.conf file and make below entries.
[ProLaserJet]
comment = ProLaserJet
path = /var/spool/samba4/
browseable = yes
printable = yes
printer name = ProLaserJet
[ProLaserJet2]
comment = ProLaserJet2
path = /var/spool/samba4/
browseable = yes
printable = yes
printer name = ProLaserJet2
File:GSTNCUPS
5. Restart samba service.
# systemctl stop samba4.service
File:GSTNCUPS
# systemctl start samba4.service
File:GSTNCUPS
